Serving the College Station area  ·  (979) 200-6628  ·  Open Mon-Sun 7am-7pm
📞 (979) 200-6628 Free Quote

Metal Roofing in Prairie View, TX (77446) · Local Professionals

College Station Metal Roofing · Fast response in Prairie View and the College Station area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+155Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Prairie View is a small city with a big history, anchored by Prairie View A&M University and the wide, flat prairie land that surrounds it. The housing stock here runs from mid-century brick and wood-frame homes near campus to modest ranch houses and newer builds along FM 1098 and University Drive, many with low-pitched shingle roofs that have seen decades of sun, hail, and humidity.

When those roofs start to fail, homeowners in Prairie View (77446) call College Station Metal Roofing because we know this area's specific challenges: heavy clay soil that shifts with the weather, intense summer heat that bakes shingles, and spring storms that send limbs and hail onto roofs. We are based in College Station and serve Prairie View and the surrounding communities, bringing straight answers and quality metal roofing to every job.

Metal Roofing in Prairie View (77446)

Prairie View sits on the flat to gently rolling prairie of Waller County, with soils that are heavy black and gray clay. That clay swells when it's wet and shrinks when it's dry, which can cause foundations to move and roofs to shift slightly over time. Many homes here are mid-century ranches with low-slope roofs that were originally shingled, and those shingles take a beating from the intense sun and heat. The area also gets its share of spring hailstorms and straight-line winds, plus heavy rain from tropical systems that move in from the Gulf. Oak and pecan trees are common, and falling limbs are a frequent cause of roof damage. We understand these local conditions and choose metal roofing systems that handle expansion and contraction, resist hail impact, and shed water efficiently.

Our team has worked on homes and commercial buildings throughout the Brazos Valley, including Prairie View and the neighborhoods around the university. We know the permit requirements for Waller County and the city of Prairie View, and we can help you navigate any HOA or historic district rules if they apply to your property.

Our services in Prairie View

How a Job Works in Prairie View

Step 1: It starts with a phone call to (979) 200-6628 or a request through our website. We schedule a free on-site assessment at your Prairie View property, where we inspect your current roof, take measurements, and discuss your options. We'll explain what we find and give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we order materials and schedule the work. For many Prairie View homes, especially those near the university or in older neighborhoods, access can be tight, so we plan for that. We also handle permit applications with the city or county as required. Our crew is experienced with all types of metal roofing, from standing seam to corrugated panels, and we work efficiently to minimize disruption.

Step 3: After installation, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the project with you to make sure you're satisfied, and we don't consider the job done until you are. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Prairie View depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and gutter installation for metal roofs starts at $9 per linear foot. These are starting prices, and your actual cost will be confirmed after a free estimate. Call us at (979) 200-6628 to schedule yours.

My house near Prairie View A&M has a low-pitch roof that gets full afternoon sun. Is standing seam a good choice for that kind of heat?
Yes. Standing seam metal roofing performs very well on low-slope and full-sun exposures. The raised seams allow for thermal movement, and the reflective finishes help reduce heat gain. We often recommend standing seam for homes around the campus area because it handles the expansion and contraction from daily temperature swings better than shingles.
A storm just blew through Prairie View and I think some panels lifted. How fast can you get out to check for damage?
We offer free storm damage inspections and prioritize emergency calls after storms. Call us at (979) 200-6628 and we will schedule a visit as soon as possible, usually within a day or two depending on call volume. We can tarp or secure any open areas to prevent further water damage.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Prairie View?
For a basic metal roof replacement on a 1,500 square foot ranch, you might be looking at a range starting around $9 per square foot, so roughly $13,500 and up, depending on the material and any repairs needed to the decking or structure. Standing seam or stone-coated steel will be higher. We provide a detailed written estimate after inspecting your roof.
Do I need a permit from the city of Prairie View to replace my roof, and can you handle that for me?
Yes, a permit is typically required for a full roof replacement in Prairie View. Requirements vary, so we confirm with the city or county before starting. We handle the permit application and inspection coordination for you as part of our service.
My neighbor's oak tree hangs over my roof, and I'm worried about limbs falling. What are my options if a limb damages my metal roof?
First, we can inspect your roof and document any existing damage. If a limb falls, our storm damage repair service can fix punctures or dents. As for the tree, you may need to discuss trimming with your neighbor, but we can advise on roof protection options like snow guards or heavier gauge panels. We do not handle tree removal, but we can recommend local arborists.
Are you fully insured in case something goes wrong while working on my Prairie View home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Prairie View's climate, and when should I schedule it?
Metal roofs are low maintenance, but in our climate we recommend an annual inspection, ideally in the spring before storm season or in the fall. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of sealant wear. We offer maintenance plans and can perform a free inspection to catch small issues before they become leaks.
Why choose us?

Trusted professionals in College Station

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in College Station

All your work handled by qualified professionals in College Station

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

155+ Verified Client Reviews in College Station

⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in College Station ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm