Serving the College Station area  ·  (979) 200-6628  ·  Open Mon-Sun 7am-7pm
📞 (979) 200-6628 Free Quote

Metal Roofing in Giddings, TX (78942) · Local Professionals

College Station Metal Roofing · Fast response in Giddings and the College Station area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+155Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Giddings still feels like a ranching town that happens to sit at the crossroads of US 290 and US 77, and the housing stock shows it: older wood-frame homes on generous lots near the courthouse square, brick ranches out on the county roads, and a growing number of acreage properties with metal barns and shops. If your roof is original to a 1960s frame house or you are tired of replacing shingles on a ranch outside town every time hail rolls through, you are in the right place.

Homeowners in Giddings (78942) call College Station Metal Roofing because we know the difference between a downtown cottage that needs a low-profile panel and a ranch house that needs stone-coated steel to match the barn. We are based in College Station and serve Giddings and the surrounding area, and we bring the same crew and the same standards whether we are working off a paved street or a gravel drive off FM 141.

Metal Roofing in Giddings (78942)

The ground here is heavy black and gray clay that swells and shrinks with every wet and dry cycle, and that matters for roofing more than people expect. On older frame homes, that movement shows up as racked framing and wavy decking, so we check the substrate before we ever quote a panel. Out on the acreage properties, access is the other variable: long gravel drives, low tree limbs, and gates that a delivery truck cannot clear mean we plan material drops and staging before the first day. Giddings also gets the same spring hail and straight-line winds that come across the Brazos Valley, and the older shingle roofs near the square and along the side streets take the worst of it because they are already at the end of their service life.

Our team has worked on everything from downtown bungalows to ranch shops and metal barns in Lee County. We install standing seam, R-panel and corrugated, metal shingle, and stone-coated steel, and we repair the fasteners, seams, and flashing that fail first on older metal roofs. If you are weighing a full replacement against a retrofit over existing shingles, we will tell you honestly what your deck and your code allow.

Our services in Giddings

How a Job Works in Giddings

Step 1: you call (979) 200-6628 and we set up a free on-site assessment. We walk the roof, check the deck and flashing, look at how the panels or shingles are performing, and talk through your options in plain terms. You get a written estimate, not a pressure pitch.

Step 2: once you approve, we pull the permit with the City of Giddings or the county as required and schedule the work. On tighter in-town lots we stage materials in the driveway and keep the street clear, and on rural properties we coordinate delivery around gates, overhead lines, and livestock. If your home is in a historic review area or under an HOA, we help you get the panel profile and color approved before anything is ordered.

Step 3: we clean up every day and do a final walkthrough with you when the job is done. Magnets go over the yard and driveway for nails, gutters get checked, and we do not leave until you have seen the finished work and know what to expect going forward.

Pricing in Giddings depends on the size and pitch of the roof, the condition of the deck, access, and how soon you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and stone-coated steel and metal shingle both start at $9. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight work at $600. Storm and wind damage inspections are free, and we document what we find so you can file an insurance claim if it applies. Call (979) 200-6628 for a free estimate on your property.

My 1960s frame house near the Giddings courthouse square has a low-pitch shingle roof that keeps leaking. Is metal a good fit?
Very often, yes. Low-slope roofs on older frame homes are where shingles struggle most, and a standing seam or ribbed panel system handles that pitch better when it is detailed correctly. We check the deck first because clay movement in this area can leave the framing out of plane, and we will tell you if the substrate needs work before panels go on.
A storm just peeled panels off my barn roof outside Giddings. How fast can you get out?
Call (979) 200-6628 and we will schedule a free storm and wind damage inspection as quickly as we can, usually within a day or two depending on how many calls are coming in after the same storm. We document the damage, tarp or secure what needs it, and give you a repair or replacement estimate.
What does a metal roof replacement cost on a typical Giddings ranch house?
Most ranch homes here land somewhere in the range of the published starting prices, with metal roof replacement starting at $9 per square foot and installation at $8. The final number depends on roof size, pitch, deck condition, and whether we are removing one layer or more. We give you a written estimate after walking the roof.
Do I need a permit for a metal roof in Giddings, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and inspection requirements vary by jurisdiction, so we confirm with the City of Giddings or Lee County before work starts. We handle the permit process for you and build the timing into the schedule.
My neighbor and I disagree about where the property line sits, and my new roof may overhang it. What do we do?
Get a survey before any panel is ordered if there is any question. We build to the line you can document, and we will not put a roof past a boundary you cannot support. If your property is under an HOA, we also help you submit the panel profile and color for approval before materials are ordered.
Is your crew covered by insurance if someone gets hurt on my Giddings property?
Yes. We are fully insured with general liability and workers' compensation, and we are glad to provide proof of coverage before we start. That protects you as the property owner as much as it protects our crew.
What should I do to keep a metal roof in good shape through Giddings summers and storm season?
Have the roof inspected once a year, ideally in spring before hail season, and after any major storm. Fasteners back out over time on older panels, and seams and flashing are where leaks start. We check and re-torque fasteners, reseal penetrations, and clear debris from valleys and gutters so the roof drains the way it should.
Why choose us?

Trusted professionals in College Station

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in College Station

All your work handled by qualified professionals in College Station

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

155+ Verified Client Reviews in College Station

⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in College Station ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm