Serving the College Station area  ·  (979) 200-6628  ·  Open Mon-Sun 7am-7pm
📞 (979) 200-6628 Free Quote

Metal Roofing in Anderson, TX (77830) · Local Professionals

College Station Metal Roofing · Fast response in Anderson and the College Station area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+155Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Anderson, Texas, is a small town with a big history, anchored by the Grimes County Courthouse square and surrounded by rural acreage, ranches, and the rolling pastures of the Brazos Valley. The housing stock here is a mix of older brick and wood-frame homes near downtown, Victorians and Craftsman cottages on tree-lined streets, and modern ranch houses on large lots out in the county. With ZIP code 77830, Anderson sits at the crossroads of Highway 90 and FM 149, just a short drive from College Station, and its roofs take a beating from intense sun, spring hailstorms, and the occasional fallen oak limb.

Homeowners and property managers in Anderson call College Station Metal Roofing because we understand the local conditions: heavy clay soils that shift with the weather, humid heat that bakes shingles, and the need for roofing systems that can handle hail and high winds. Whether you are near the courthouse square or out on a rural tract, we bring the same level of craftsmanship and local knowledge to every job.

Metal Roofing in Anderson (77830)

Anderson properties present unique challenges. The terrain ranges from flat lots near downtown to gently rolling acreage with metal barns and shops. The heavy black and gray clay soil expands and contracts with moisture, which can affect foundation stability and, by extension, roof alignment. Older homes often have low-pitched roofs that are prone to leaks, while newer homes may have complex rooflines with multiple valleys and penetrations. We also see a lot of mature post oaks and pecans whose limbs can damage roofs during storms. Our team is experienced in assessing these conditions and recommending the right metal roofing solution, whether it is standing seam for its clean look and durability, corrugated panels for agricultural buildings, or stone-coated steel for a more traditional appearance.

We have been serving Anderson and the surrounding College Station area for years, and we know the local building department requirements, common HOA restrictions, and the weather patterns that affect roofs here. From the historic homes near the courthouse to the newer developments along FM 149, we have worked on them all.

Our services in Anderson

How a Job Works in Anderson

Step 1: It starts with a phone call to (979) 200-6628 or a request through our website. We schedule a free on-site assessment at your Anderson property, where we inspect your current roof, discuss your goals, and provide a detailed written estimate. We will point out any issues we find and explain your options clearly, with no pressure.

Step 2: Once you approve the estimate, we handle the permitting process with the City of Anderson and any necessary HOA coordination. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption. For homes with tight lot access or steep grades, we plan ahead to ensure materials and equipment are handled safely. We use high-quality materials and proven installation techniques to ensure your new metal roof performs as it should.

Step 3: After the work is complete, we conduct a thorough cleanup, removing all debris and using magnetic sweepers to pick up nails and screws. We walk the property with you to ensure you are satisfied and answer any questions. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Anderson varies based on the size and complexity of your roof, the material chosen, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, common fixes like leak repair start at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can be a cost-effective option if your existing shingles are in good condition. Factors like accessibility, roof pitch, and the number of penetrations can affect the final price. Call us at (979) 200-6628 for a free estimate tailored to your Anderson property.

My house near the Grimes County Courthouse has a low-pitched roof that leaks every time it rains. Can a metal roof solve this?
Yes, a metal roof is an excellent solution for low-pitched roofs because it sheds water quickly and can be installed with a minimal slope. We often recommend standing seam or corrugated panels with proper underlayment for such cases. We will assess your roof's structure and pitch to determine the best system.
A storm just blew through Anderson and lifted some panels on my barn. How quickly can you respond?
We prioritize storm damage emergencies. Call us at (979) 200-6628, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What is the typical cost to replace a metal roof on a 2,000 square foot home in Anderson?
For a 2,000 square foot home, a basic metal roof replacement might range from $18,000 to $24,000, depending on the material and complexity. Standing seam could be higher. We provide free estimates so you can get an accurate figure for your specific property.
Do I need a permit to replace my roof in Anderson, and how long does it take?
Yes, the City of Anderson typically requires a permit for roof replacements. We handle the permitting process for you, and turnaround times vary but usually take a few business days. We will ensure all inspections are scheduled and passed.
My neighbor's tree branches hang over my roof. Can I trim them without permission, and will my HOA approve a metal roof?
In Texas, you generally have the right to trim branches that extend over your property line, but it is best to check local ordinances and communicate with your neighbor. For HOA approval, we can provide material samples and documentation to help you get approval. Many HOAs in the area allow metal roofs with certain profiles and colors.
Are you fully insured for roofing work in Anderson?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Anderson's climate?
Metal roofs are low maintenance, but we recommend annual inspections to check for loose fasteners, debris buildup, and signs of wear. In Anderson's humid climate, keeping gutters clear and trimming overhanging branches is important. We offer maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in College Station

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in College Station

All your work handled by qualified professionals in College Station

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

155+ Verified Client Reviews in College Station

⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in College Station ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm