Licensed & Insured, in College Station and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in College Station
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (979) 200-6628 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in College Station and surrounding areas · On-site visits included · Free estimate within 24h
College Station Metal Roofing is a team of local certified professionals based in College Station. We respond quickly in College Station and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (979) 200-6628⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews
“We needed a new roof on our hay barn out off Highway 6 and these guys knocked it out in two days with a four-man crew. They used corrugated panels that matched what was there before, and honestly it looks better than the original ever did. Cleaned up every last screw and scrap piece before they left.”
Agricultural Metal Roofing
“Our front porch roof had been leaking around the flashing for who knows how long and I was worried it was going to be a huge deal. They came out, fixed the flashing and resealed a few problem spots in about three hours. Fair price and no pressure to replace the whole thing.”
Metal Roof Repair
“Had them put a red metal roof on our equipment shed and it turned out sharp. The crew was respectful of our property and even worked around our schedule since we had livestock nearby. Only complaint is they were a couple days later than originally quoted, but the quality made up for it.”
Commercial & Agricultural Metal Roofing
“After two hail storms shredded our old shingles, we finally went metal and I wish we'd done it years ago. The standing seam install on our brick house took about a week and the crew was meticulous about the trim around the dormers. It's been through one good storm already with zero issues.”
Standing Seam Metal Roofing
“They fixed a leak around our roof vent that two other companies couldn't seem to figure out. Turned out the issue was the flashing and some loose fasteners, and they had it sealed up in an afternoon. Haven't seen a drop since.”
Metal Roof Repair
“Replaced the old rusty metal roof on our brick ranch house with a new stone-coated steel system and the difference is night and day. Crew of five, done in four days, and they hauled off every bit of the old material. Neighbors have already asked me who did the work.”
Metal Roof Replacement
“Straightforward metal roof install on our place south of town and everything went exactly as quoted. They walked me through panel options and didn't try to upsell me on anything fancy. Two months in and it's holding up great.”
Metal Roof Installation
“We did the retrofit over our existing shingles on the brick house to save money and time, and I was skeptical at first. But the crew explained the whole process, added the proper underlayment, and the finished roof looks fantastic. Saved us thousands compared to a full tear-off.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in College Station · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener R-panel install | Starting at $8/sq ft | Includes panels, underlayment and standard trim; steeper pitch or heavy tear-off moves the price up. |
| Standing seam install | Starting at $12/sq ft | Concealed clips, raised seams and formed flashing; roof complexity and panel gauge drive the range. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes textured panels and matching trim; dormers, valleys and multiple roof planes add labor. |
| Retrofit over one shingle layer | Starting at $9/sq ft | Skips tear-off where code allows; soft decking or a second layer changes the scope. |
| Complex or large-scale job | On estimate | Steep multi-plane roofs, chimney and skylight flashing, or deck repair need an on-site look first. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam panel install, basic pitch | Starting at $10/sq ft | Covers panels, concealed clips, and standard trim; steeper pitch or complex hips raise the rate. |
| Standing seam over existing shingles | Starting at $12/sq ft | Panels on battens over the old roof; added cost comes from deck prep and code layer limits. |
| Mechanically seamed premium system | Starting at $14/sq ft | Double-lock seams, heavier gauge, and upgraded underlayment; wind exposure and height push it higher. |
| Complex or large-scale roof | On estimate | Multiple valleys, dormers, or a steep two-story need an on-site look before any number is given. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener R-panel replacement | Starting at $9/sq ft | Includes tear-off, haul-away, decking inspection, underlayment, and new corrugated or ribbed panels. |
| Standing seam replacement | Starting at $13/sq ft | Includes concealed-fastener panels, new underlayment, and new flashing at penetrations and walls. |
| Stone-coated steel or metal shingle | Starting at $12/sq ft | Includes textured or stamped panel system with full tear-off and decking repair as needed. |
| Complex or large-scale job | On estimate | Multi-story roofs, steep pitches, multiple valleys, or rotten decking need an on-site look first. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over single-layer shingles | Starting at $7/sq ft | Exposed-fastener panel over a sound single-layer roof, includes slip sheet and basic flashing. |
| Standing seam retrofit | Starting at $12/sq ft | Concealed-fastener standing seam over purlins, includes new drip edge and valley metal. |
| Stone-coated steel retrofit | Starting at $11/sq ft | Textured steel panels over a slip sheet, includes ridge cap and penetration boots. |
| Deck repair or partial re-sheathing | On estimate | Soft spots and rotted sheathing found during inspection are quoted per sheet before work starts. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, small flashing) | Starting at $450 | Covers backed-out screws, resealed penetrations and small flashing fixes on an accessible roof. |
| Single panel replacement | Starting at $650 | Includes matching panel, sealant and labor; steeper or higher roofs move the price up. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $850 | Rebuilds the flashing and counterflashing; masonry condition and roof height affect the total. |
| Storm or hail damage repair | On estimate | Scope depends on how many panels are dented or lifted and whether deck repair is needed. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak source repair | Starting at $450 | Includes leak trace, fastener or boot replacement, water test, and written summary; price rises with roof height and access difficulty. |
| Flashing or penetration rebuild | Starting at $750 | Covers chimney, wall, or skylight flashing rebuild with new metal and UV-rated sealant; steeper pitches and two-story access add cost. |
| Panel or seam repair | Starting at $900 | Includes seam re-crimp, puncture patch, or panel section replacement; matching panel profile and color availability affects the number. |
| Emergency tarp and temporary seal | Starting at $350 | Same-day tarping after storm or tropical rain; credited toward the permanent repair when we do the follow-up work. |
| Travel | Included | in College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted re-fasten (single slope or small outbuilding) | Starting at $750 | Covers failed fastener replacement and re-sealing on a limited roof area, priced by count and access. |
| Full field re-fasten (residential) | Starting at $1,450 | Every fastener on the main slopes replaced with UV-resistant washers, priced by roof size and pitch. |
| Oversized fastener work | Starting at $1,100 | Larger-diameter screws for wallowed holes on older ribbed and corrugated panels, priced by hole count. |
| Commercial or agricultural roof | On estimate | Large shop, barn, or commercial roof needs an on-site count and access review before a number is given. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof install | Starting at $5.50/sq ft | Includes panels, underlayment, screws, and basic closures; pitch and access move the price. |
| R-panel roof install | Starting at $6.25/sq ft | Includes ribbed panels, closures, and fasteners; panel gauge and roof height affect the rate. |
| Retrofit over existing shingles | Starting at $5.75/sq ft | Includes battens and panels over the old roof where code allows; deck condition changes the scope. |
| Complex or steep-pitch roof | On estimate | Steep pitch, multiple penetrations, and tight access need an on-site look before we quote. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement (tear-off) | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and standard shingle profile installation. |
| Metal shingle over existing deck (retrofit) | Starting at $7/sq ft | Includes prep, underlayment, and shingle install where existing layers and code allow. |
| Slate or shake profile upgrade | Starting at $11/sq ft | Premium stamped profiles and finishes cost more per square than standard architectural styles. |
| Deck repair and flashing rebuild | On estimate | Soft sheathing, chimney flashing, and valley work need an on-site look before pricing. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel panel installation | From $9/sq ft | Includes tear-off, underlayment, coated panels, and standard flashing on an average pitch. |
| Stone-coated shake profile | Starting at $11/sq ft | Premium textured shake look, higher material cost, best on visible front slopes and two-story homes. |
| Retrofit over existing shingles | Starting at $8/sq ft | Installed over a sound single layer where code allows, saving tear-off and disposal cost. |
| Repair and re-fastening | On estimate | Scope depends on panel damage, flashing condition, and access, so we look before quoting. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Aluminum porch or accent roof | Starting at $20/sq ft | Includes rust-free aluminum panels, underlayment, and custom flashings for porches, bay windows, and dormers. |
| Zinc architectural panels | Starting at $28/sq ft | Pre-weathered zinc in standing seam or shingle profile, with concealed clips and hand-formed flashings included. |
| Copper standing seam roof | Starting at $40/sq ft | Hand-formed copper panels, soldered seams, and custom flashings; material cost and fabrication time drive the rate up. |
| Bay window and dormer fabrication | On estimate | Custom-bent copper caps, crickets, and flashings need an on-site measure before we quote the job. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound panels | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and one reflective coat; price rises with heavy chalk or rust. |
| Rust treatment and full re-coat | Starting at $3.25/sq ft | Adds rust converter, primer, and screw replacement at every rusted fastener head. |
| Stone-coated steel re-coat | Starting at $3.75/sq ft | Restores color and granule look; cost moves with panel profile and amount of fading. |
| Large barn or shop roof | On estimate | Square footage, roof pitch, and access decide the number, so we walk it first. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney flashing reset | Starting at $600 | Includes sealant removal, counter-flashing re-bend into brick, and polyurethane re-seal on a one-story roof. |
| Skylight curb re-flash | Starting at $850 | Includes curb inspection, new pan and step flashing, and water test; steep two-story access moves the price up. |
| Valley or step flashing replacement | Starting at $900 | Includes old metal removal, deck inspection, and new fabricated flashing; rotten decking adds to the scope. |
| Complex or large-scale job | On estimate | Multiple penetrations, skylight replacement, or deck repair need an on-site look before we quote a number. |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee added to the repair. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Entry or patio roof reinforcement | Starting at $1,200 | Includes inspection, fastener replacement, and clip or edge reinforcement on one steep section |
| Multiple steep roof sections | Starting at $1,850 | Covers two or more steep sections, with access and pitch driving the final figure |
| Hail-damaged panel and edge repair | Starting at $1,500 | Includes panel lap and edge metal inspection plus reset or replacement of damaged pieces |
| Full roof re-fastening with reinforcement | On estimate | Needs an on-site look because panel count, pitch, and access vary widely |
| Travel | Included | In College Station and surrounding areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (979) 200-6628, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written repair-versus-replace assessment included at no charge |
| Single panel or fastener repair | Starting at $350 | Covers one to three panels or a localized screw re-fastening, with material match confirmed first |
| Multi-panel or flashing repair | Starting at $850 | Covers several panels plus flashing or ridge cap work, priced by roof pitch and access |
| Insurance documentation package | Included with repair | Photo packet, written scope, and adjuster-ready notes prepared as part of the repair job |
| Large or complex storm damage | On estimate | Widespread damage, steep two-story access, or specialty profiles need an on-site look before pricing |
| Travel | Included | In College Station and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential metal roof inspection | Free estimate | Full walk inspection with photo report, best for single-story walkable roofs in College Station. |
| Steep or two-story roof inspection | Starting at $150 | Drone-assisted inspection for steep pitches and tall roofs where walking is unsafe. |
| Pre-purchase inspection report | Starting at $250 | Written report on remaining service life and repair costs for buyers and realtors. |
| Complex or large-scale property | On estimate | Multiple buildings, barns, or shops require an on-site look before pricing. |
| Travel | Included | In College Station and surrounding Brazos Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard profile | Starting at $9/linear ft | Includes on-site forming, hangers, end caps, and basic downspouts for a typical single-story run. |
| Standing seam hanger system | Starting at $12/linear ft | Hidden clips that clamp the seam without piercing panels, priced by roof height and access. |
| Debris guard installation | Starting at $4/linear ft | Stainless mesh sized for oak and pecan leaf load, added to the gutter run price. |
| Copper or specialty metal gutter | On estimate | Material cost and soldered joints vary by profile, so we measure the run before quoting. |
| Travel | Included | in College Station and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (979) 200-6628, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair or re-fastening | Free estimate | Covers leak tracing, backed-out screw replacement, and small panel repairs, priced after we walk the roof. |
| Exposed-fastener panel replacement | Starting at $4.50 per sq ft | New ribbed panels and fasteners, with price moving on gauge, pitch, and building height. |
| Commercial standing seam | On estimate | Concealed-fastener systems need an on-site look at purlins, span, and transitions before quoting. |
| Coating and restoration | Starting at $2.00 per sq ft | Cleaning, priming, and coating sound panels, with cost driven by roof condition and prep. |
| Travel | Included | In College Station and surrounding Brazos County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (979) 200-6628, with no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in College Station want someone who understands the local building stock, not a call center three states away. College Station Metal Roofing is a professional metal roofing contractor serving College Station and the surrounding Brazos Valley, with a network of licensed, insured local contractors who handle metal roof installation, replacement, re-roofs, and repairs on the brick ranches, two-story subdivision homes, and acreage properties that define this area. From the low-pitched shingle roofs of College Hills and Southside to the newer stucco and board-and-batten homes in Wellborn and Rock Prairie, we match the system to the structure and the conditions it actually faces.
This is flat to gently rolling country between the Brazos and Navasota rivers, set on heavy black and gray clay that swells and shrinks with the weather, under post oaks, live oaks, pecans, and cedar elms. Roofs here take intense summer sun, humid heat that cycles panels through daily expansion, spring hail, straight-line thunderstorm winds, and limbs that come down in the night. We serve College Station, Bryan, Navasota, Brenham, and Hearne, and we are as comfortable on a downtown Bryan Craftsman cottage as on a metal barn in Wixon Valley. When you are ready for straight guidance, reach out for a free estimate.
Most metal roof leaks we see in the Brazos Valley are not mysterious. On the large stock of 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once the washer fails, water works past the screw head and into the panel lap. The second common cause is seam separation from thermal movement: panels expand and contract daily in the Texas heat, and fasteners or seams that were never designed for that cycle eventually open up. Failed pipe boots and flashing at chimneys, skylights, and valleys are next, followed by wind-lifted panels after a thunderstorm and punctures from fallen oak or pecan limbs.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the point of entry, so what looks like a ceiling stain in a hallway may originate twenty feet away. By the time it shows inside, you can be looking at rotted sheathing, saturated insulation, and stained drywall. That is why we start every repair call with a proper inspection rather than a tube of sealant. If the panels and seams are sound and the issue is fasteners and washers, a full screw replacement often restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right call. If the deck is soft or the panels are at the end of their life, we will say so.
For active leaks, separated seams, flashing gaps, or storm damage, call (979) 200-6628 and we will get a local contractor out to assess it. You can read more about our metal roof repair process, or contact us to schedule an inspection. No pressure, no storm-chaser tactics, just an honest read on what your roof needs.
We install the full range of metal systems, and the right one depends on your home, your budget, and how much maintenance you want to sign up for. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, clean lines, and excellent performance in heat and hail. Corrugated & Ribbed Panel Roofing is the economical workhorse, common on cabins, barns, shops, and metal-roofed porches across the Brazos Valley. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Both are legitimate choices. When the deck is sound, Metal Roof Over Shingles (Retrofit) can save on tear-off and disposal; when it is not, a full tear-off is the right call. We will walk you through it before you commit.
Metal roof projects are typically quoted per square foot for installations, while repairs are often flat-rate depending on scope. Price depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, the condition of the decking, and access to the roof. Because those factors vary so much from one College Station home to the next, we give typical ranges rather than fixed numbers, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
For a clearer picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof rather than a ballpark.
After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document what we see accurately and let you make an informed decision. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also affect panel profile and color choices.
We handle the paperwork we are responsible for, but we never treat permitting as advice. Requirements vary, so always verify with the College Station building or planning department before starting your project. If you have questions about documentation or next steps, contact us and we will point you in the right direction.
Ready to get started? College Station Metal Roofing serves in College Station and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628
Your Free Quote Request