Serving the College Station area  ·  (979) 200-6628  ·  Open Mon-Sun 7am-7pm
📞 (979) 200-6628 Free Quote

Metal Roofing in Bellville, TX (77418) · Local Professionals

College Station Metal Roofing · Fast response in Bellville and the College Station area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+155Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bellville is the kind of town where the courthouse square still anchors everything, and the homes around it tell the story: Victorian cottages, Craftsman bungalows, and mid-century brick ranches on tree-shaded lots along East Main and South Masonic. The flat to gently rolling ground and heavy clay soil here are hard on roofs, and the summer sun and spring hail don't help.

Homeowners in 77418 call College Station Metal Roofing because we understand this housing stock and the look that fits it. Whether you're near the Austin County Fairgrounds or out on a few acres toward Kenney, we bring metal roofing that holds up to Brazos Valley weather without making your house look like a barn.

Metal Roofing in Bellville (77418)

Bellville sits on some of the heaviest black and gray clay in the region, and that ground moves with every wet and dry cycle. On older homes around the courthouse square, that movement shows up as cracked flashing and pulled fasteners. On the newer places out toward the fairgrounds and along FM 529, we see low-slope porches and additions where water ponds because the original shingles were never meant for that pitch. The live oaks and pecans that shade these streets are beautiful, but they drop limbs and fill gutters, and that is where most leaks start. We work with the lot shapes here, from tight in-town properties with limited driveway access to wide-open acreage where we can stage materials easily.

Our team has been serving Bellville and the surrounding College Station area long enough to know which panel profiles and colors pass muster with the historic look of the county seat and which ones suit a modern build on the edge of town. We are fully insured with general liability and workers' compensation, and we pull permits through the city and county as required.

Our services in Bellville

How a Job Works in Bellville

Step 1: You call us at (979) 200-6628 or request a free estimate online. We schedule a time to walk your roof and property, look at the decking, flashing, and attic ventilation, and talk through options that fit your budget and the style of your home. You get a written estimate before any work begins.

Step 2: Once you approve, we order materials and schedule the install. In Bellville, that often means coordinating with the city for a roofing permit and, if you are in a historic district or HOA, making sure the panel profile and color are approved first. We protect your landscaping and driveway, and we keep the site organized, especially on tighter in-town lots where parking and access take planning.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. We use a magnet sweep for nails, haul away old materials, and make sure you know how to care for your new roof. We leave your property clean and your roof ready for the next storm.

Pricing in Bellville depends on the size and pitch of your roof, how many layers of old shingles we remove, the condition of the decking, and how quickly you need the work done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from $10 per square foot, and a full replacement starts around $9 per square foot. If your home has good existing shingles, a metal roof over shingles retrofit can start at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. We give free estimates, so call (979) 200-6628 and we will give you a real number for your Bellville property.

My 1940s bungalow near the Bellville courthouse square has a steep, complex roof. Can you handle metal shingles that match the historic look?
Yes. The older homes around the square often have multiple roof planes, dormers, and porches, and metal shingle roofing is a great fit because it gives you the traditional look of shingles with the longevity of metal. We measure every valley and penetration carefully, and we can match colors that suit the era of your home. We will also check whether your home is in a historic district that requires design review before we order materials.
A storm just took off some panels and I have water coming in. How fast can you get to my place in Bellville?
We prioritize active leaks and storm damage. Call us at (979) 200-6628 and we will schedule the soonest available inspection, often same or next day for emergencies. We can tarp or make temporary repairs to stop the water, then give you a written estimate for the permanent fix. We document everything for your insurance claim, though coverage decisions are up to your insurer.
What does a typical metal roof replacement cost for a 2,000 square foot ranch in Bellville?
For a single-story ranch with a simple gable roof, a metal roof replacement often falls in the range of $9 to $14 per square foot installed, depending on the panel type, whether we remove the old shingles, and any decking repairs. That puts a 2,000 square foot roof roughly between $18,000 and $28,000. We give you a detailed, itemized estimate after we inspect, so you know exactly what you are paying for.
Do I need a permit to replace my roof in Bellville, and who handles that?
Roofing permits are commonly required for a full replacement or re-roof in Bellville and Austin County. The rules and fees can vary, so we confirm the current requirements with the city or county building department before we start. We can pull the permit for you and make sure the work meets local code, including limits on how many layers of shingles can be recovered.
My neighbor and I share a property line, and I want to make sure my new metal roof doesn't cause drainage issues for them. What should I do?
We can adjust gutter placement and downspout locations to keep water on your property and away from the line. If your HOA has rules about roof color or panel style, we will help you get the approval before ordering. For property line questions, it is best to check your survey and talk with your neighbor early, and we can recommend a surveyor if needed. We will work with you to keep the project smooth.
Are you insured for work on my Bellville home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Bellville's climate, and when should I schedule it?
The main things are keeping gutters and valleys clear of leaves and pecans, checking fasteners and sealant on flashing once a year, and washing off pollen and dirt to keep the finish looking good. Late winter or early spring is a good time to schedule an inspection before storm season. We offer free estimates for inspections and can set you up with a simple maintenance plan.
Why choose us?

Trusted professionals in College Station

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in College Station

All your work handled by qualified professionals in College Station

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

155+ Verified Client Reviews in College Station

⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in College Station ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm