Serving the College Station area  ·  (979) 200-6628  ·  Open Mon-Sun 7am-7pm
📞 (979) 200-6628 Free Quote

Metal Roofing in Caldwell, TX (77836) · Local Professionals

College Station Metal Roofing · Fast response in Caldwell and the College Station area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+155Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Caldwell is a farm town where the grain elevators and the courthouse square still anchor daily life, and the housing stock tells the story: older wood-frame homes and brick ranches near the center, acreage properties with metal barns and shops out on the county roads, and newer builds spreading toward the highway. Lots are wide, trees are big, and the flat blackland prairie means water has nowhere to go when it rains hard.

Homeowners in 77836 call College Station Metal Roofing because we understand what Caldwell roofs go through. Between the July heat that bakes shingles, the spring hail that dents and loosens panels, and the oak limbs that come down in every good thunderstorm, a roof here has to be tough. We are based just up the road in College Station, and we bring the same crew and the same standards to Caldwell that we do to our own neighbors.

Metal Roofing in Caldwell (77836)

Caldwell sits on the edge of the blackland prairie, and that heavy clay soil swells and shrinks with the weather. It moves foundations, and it moves the ground around your downspouts. When we install a metal roof here, we pay attention to how water leaves the roof and where it goes once it hits the ground. On the older homes near the square, we often find low-slope roofs that have been patched and re-patched over the years. On the acreage properties outside town, we see a lot of barns and shops with R-panel roofs where the screws have backed out or the rubber washers have dried up. And on the newer subdivision homes, we see composition shingles that are only ten or fifteen years old but already showing hail bruises and granule loss because of the intense sun.

Our team has worked on everything from Victorian cottages in downtown Bryan to metal barns out in Wixon Valley, and we bring that range of experience to Caldwell. We know how to match a panel profile to an older home, how to handle a steep pitch on a two-story, and how to make a retrofit over existing shingles look clean and last. We also know the local inspectors and what they look for, so the job gets done right the first time.

Our services in Caldwell

How a Job Works in Caldwell

Step 1: You call us at (979) 200-6628 or fill out the form, and we set up a free on-site assessment. We walk the roof, check the attic if accessible, look at the flashing and fasteners, and talk with you about what you are seeing. We take photos and give you a written estimate with options, not pressure.

Step 2: Once you approve, we pull the permit with the city or county as required and schedule the work. In Caldwell, that might mean coordinating with a homeowner association or historic district if you are near the downtown square, or planning around a tight driveway on an older lot. We protect your landscaping and your vehicles, and we keep the site secure each evening.

Step 3: When the work is done, we clean the site thoroughly, including a magnet sweep for nails. We walk the roof with you, show you the finished work, and make sure you understand the warranty and maintenance. We do not leave until you are satisfied.

Pricing for metal roofing in Caldwell depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs start around $450, and a full coating or painting job starts around $2.50 per square foot. For a typical 1,500 to 2,000 square foot ranch home, most homeowners are looking at a range that reflects the material and the complexity of the job. We give free estimates and explain all the cost factors up front, so call (979) 200-6628 to set one up.

My barn out on FM 2000 has screws backing out and leaking. Can you fix that without replacing the whole roof?
Yes. That is one of the most common calls we get from Caldwell acreage properties. Screw replacement and re-fastening starts around $750, and we replace the old screws with new ones that have proper washers, then check the panels for any that are loose or damaged. If the panels are still in good shape, this can add years to the roof.
A storm just took off some panels on my house near the Caldwell square. How fast can you get out?
We offer free storm and wind damage inspections, and we prioritize active leaks and storm damage. Call us at (979) 200-6628 and we will schedule an inspection as quickly as possible. We can often tarp or make temporary repairs the same day to prevent further damage, then give you a full estimate for the permanent fix.
What does a metal roof coating cost for a typical Caldwell home, and how long does it last?
Coating and painting starts around $2.50 per square foot. For a 1,500 square foot roof, that puts you in the ballpark of $3,750 for the coating itself, plus any prep work. A good quality coating can last 10 to 15 years in our climate, and it helps reflect heat and seal minor leaks. We will give you an exact price after inspecting your roof.
Do I need a permit to replace my roof in Caldwell, and who handles that?
Roofing permits are commonly required for a full replacement or re-roof in Caldwell and Burleson County, and the rules vary depending on the scope of work. We handle the permit application and coordination with the local building department as part of the job. We will tell you what is required for your specific project during the estimate.
My neighbor says my new metal roof might drain onto their property. What are the rules about that?
In Texas, you generally cannot redirect water onto a neighbor's property in a way that causes damage. We design the gutter and drainage system to handle water on your own lot, and we can adjust downspout locations to avoid issues. If you are in an HOA, there may also be rules about roof color and panel style, and we can help you get approval before we order materials.
Are you fully insured for work at my Caldwell property?
Yes. We carry general liability insurance and workers' compensation coverage.
What should I do to maintain my metal roof in Caldwell between hail seasons?
Twice a year, walk around the house and look for loose screws, dented panels, or debris in the gutters. After a hail storm, check for dents or granules in the gutters, and call us for a free inspection if you see anything unusual. Keep tree limbs trimmed back from the roof, especially oaks and pecans, and wash off any dirt or pollen that builds up so the finish stays intact.
Why choose us?

Trusted professionals in College Station

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in College Station

All your work handled by qualified professionals in College Station

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

155+ Verified Client Reviews in College Station

⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in College Station ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm