Serving the College Station area  ·  (979) 200-6628  ·  Open Mon-Sun 7am-7pm
📞 (979) 200-6628 Free Quote

Metal Roofing in Franklin, TX (77856) · Local Professionals

College Station Metal Roofing · Fast response in Franklin and the College Station area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+155Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Franklin, Texas, is a courthouse town where the 1890s stone courthouse still anchors the square, and the streets around it are lined with brick ranches, Victorians, and Craftsman cottages that have seen more than a few hailstorms. Out past the city limits, acreage properties with metal barns, shops, and long gravel driveways stretch toward the Navasota River bottoms, and the roof is often the biggest surface on the place. Whether you are in a historic home near the square or on a ranch off Highway 79, the sun, hail, and wind here are hard on roofs.

Homeowners in Franklin (77856) call College Station Metal Roofing because we know the difference between a low-slope shingle roof on a 1960s brick ranch and a standing seam roof on a new build. We have worked on homes near the Franklin Independent School District campus and on shops and barns throughout Robertson County. If you are tired of replacing shingles every time a spring storm rolls through, we can show you what a metal roof would look like on your place.

Metal Roofing in Franklin (77856)

Franklin sits on the edge of the Brazos Valley, where the ground can be heavy black clay that swells after rain and cracks in drought. That matters for roofing because proper flashing and fastening depend on how the structure moves. Most homes here are single-story brick ranches from the 1950s to 1970s with low-pitched roofs, plus a growing number of newer builds on larger lots. The older homes often have multiple roof planes and add-on porches, which means more opportunities for leaks at transitions. On acreage, we see a lot of corrugated and ribbed panel roofs on barns and shops, and those take a beating from the sun and from oak limbs. We know how to handle the tight access on downtown streets near the courthouse, and we understand the wind exposure out in the open pastures.

Our team has been serving Franklin and the surrounding College Station area for years, and we have seen every kind of roof failure this climate can produce. From hail-bruised shingles to failed fasteners on metal panels, we can diagnose the problem and recommend a fix that fits your budget.

Our services in Franklin

How a Job Works in Franklin

Step 1: You call us at (979) 200-6628 or request a free estimate online. We schedule an on-site assessment at your Franklin property, whether you are in town or out on a ranch. We inspect the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. We then give you a written estimate with options, not pressure.

Step 2: Once you approve, we pull the required permits from the city or county, which can take a few days depending on the jurisdiction. We order materials and schedule the work. On older homes near downtown Franklin, we plan for tight lot access and protect landscaping. For acreage jobs, we coordinate delivery and staging with your schedule. We keep you informed on timing and any surprises we find under the old roof.

Step 3: After installation, we clean the site thoroughly, using magnets to pick up nails and debris. We walk the roof with you, show you the finished work, and explain any maintenance. We do not leave until you are satisfied.

Pricing for metal roofing in Franklin depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an existing roof, that starts around $9 per square foot, and a retrofit over shingles can start at $7 per square foot. Repairs for leaks or damaged panels start at $450, and screw replacement or re-fastening starts at $750. For barns and shops, corrugated and ribbed panel roofing starts at $5.50 per square foot. We always provide a free estimate so you know the numbers before we start. Call (979) 200-6628 to schedule yours.

My house near the Franklin square has a low-pitch roof and original shingles. Can you install metal over them?
Yes, we can often install a metal roof over existing shingles if the structure and code allow it. For homes near the courthouse square, we check the number of existing layers and the condition of the decking first. A retrofit can save you money on tear-off and disposal, but we will tell you honestly if a full replacement is the better choice.
A storm just blew through Franklin and lifted some panels on my barn. How fast can you get out?
We prioritize storm damage calls and can usually inspect within a day or two, depending on the volume of calls after a major storm. Call us at (979) 200-6628 to report the damage. We will secure the area if needed and provide a written estimate for repairs or replacement.
What is the typical cost to replace a shingle roof with metal on a 2,000 square foot home in Franklin?
For a 2,000 square foot home with a simple gable roof, you can expect a metal roof replacement to start around $9 per square foot, so roughly $18,000 for the roofing material and labor, depending on the panel type and accessories. More complex roofs with valleys, dormers, or multiple levels will cost more. We give free estimates with a firm price.
Do I need a permit to replace my roof in Franklin, and who handles it?
Yes, the City of Franklin typically requires a permit for a full roof replacement. Permit requirements and fees vary, so we verify with the local building department before starting. We handle the permit application and inspection process for you as part of the job.
My neighbor says my new metal roof will increase runoff onto their property. What can I do?
Metal roofs do shed water faster than shingles, so we can install gutters and downspouts to direct water away from your foundation and your neighbor's property. We can also discuss panel profiles that slow runoff. If there is a property line concern, we recommend talking with your neighbor and possibly getting a survey to confirm drainage patterns before work begins.
Are you fully insured for roofing work in Franklin?
Yes, College Station Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. This protects you and your property in case of an accident on the job.
What maintenance should I do on my metal roof in Franklin to prevent leaks?
In Franklin's climate, we recommend an annual inspection, especially after hail season. Check for loose or backed-out screws, debris in valleys and gutters, and any signs of rust or sealant failure. We offer maintenance plans and can replace worn screws and re-seal flashing to keep your roof watertight.
Why choose us?

Trusted professionals in College Station

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in College Station

All your work handled by qualified professionals in College Station

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

155+ Verified Client Reviews in College Station

⭐⭐⭐⭐⭐ 4.9/5 · 155 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in College Station · Response within 24h · No commitment · ☎ (979) 200-6628

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in College Station ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm